The Role of Radical Bridges in Polynuclear Single-Molecule Magnets

Employing radical bridges between anisotropic metal ions has been a viable route to achieve high-performance single-molecule magnets (SMMs). While the bridges have been mainly considered for their ability to promote exchange interactions, the crystal-field effect arising from them has not been taken into account explicitly. This lack of consideration may distort the understanding and limit the development of the entire family. To shed light on this aspect, herein we report a theoretical investigation of a series of N -radical-bridged diterbium complexes. It is found that while promoting strong exchange coupling between the terbium ions, the N -radical induces a crystal field that interferes destructively with that of the outer ligands, and thus reduces the overall SMM behavior. Based on the theoretical results, we conclude that the SMM behavior in this series could be further maximized if the crystal field of the outer ligands is designed to be collinear with that of the radical bridge. This conclusion can be generalized to all exchange-coupled SMMs.     

Lanthanide SMMs Based on Belt Macrocycles: Recent Advances and General Trends

Enhancement of axial magnetic anisotropy is the central objective to push forward the performance of Single-Molecule Magnet (SMM) complexes. In the case of mononuclear lanthanide complexes, the chemical environment around the paramagnetic ion must be tuned to place strongly interacting ligands along either the axial positions or the equatorial plane, depending on the oblate or prolate preference of the selected lanthanide. One classical strategy to achieve a precise chemical environment for a metal centre is using highly structured, chelating ligands. A natural approach for axial-equatorial control is the employment of macrocycles acting in a belt conformation, providing the equatorial coordination environment, and leaving room for axial ligands. In this review, we present a survey of SMMs based on the macrocycle belt motif. Literature systems are divided in three families (crown ether, Schiff-base and metallacrown) and their general properties in terms of structural stability and SMM performance are briefly discussed.     

Ground-state properties of LiV2O4 and Li1-xZnx(V1-yTiy)2O4

We present susceptibility, microwave resistivity, NMR and heat-capacity results for Li_1-xZn_x(V_1-yTi_y)₂O₄ with 0 ? x ? 0.3 and 0 ? y ? 0.3. For all doping levels the susceptibility curves can be fitted with a Curie-Weiss law. The paramagnetic Curie-Weiss temperatures remain negative with an average value close to that of the pure compound Θ≈ - 36 K. Spin-glass anomalies are observed in the susceptibility, heat-capacity and NMR measurements for both type of dopants. From the temperature dependence of the spin-lattice relaxation rate we found critical-dynamic behavior in the Zn doped compounds at the freezing temperatures. For the Ti-doped samples two successive freezing transitions into disordered low-temperature states can be detected. The temperature dependence of the heat capacity for Zn-doped compounds does not resemble that of canonical spin glasses and only a small fraction of the total vanadium entropy is frozen at the spin-glass transitions. For pure LiV₂O₄ the spin-glass transition is completely suppressed. The temperature dependence of the heat capacity for LiV₂O₄ can be described using a nuclear Schottky contribution and the non-Fermi liquid model, appropriate for a system close to a spin-glass quantum critical point. Finally an ( x / y , T )-phase diagram for the low-doping regime is presented. Received 16 March 2001 and Received in final form 30 October 2001     

A Novel Model for Protein Immobilization on Microspheres

The immobilization of proteins, especially receptor proteins commonly used in high through-put screening of drugs (HTS), have received great attention in recent years. There are many successful isothermal models for describing the adsorption of protein onto solid surface, such as Langmuir model, Bi-Langmuir model, Fowler model, Freundlich model, Freundlich-Langmuir model and Tekmin model etc. In all these models, Langmuir model was the most favorable one model accepted by many researchers, but the experimental results showed that it was not entirely fit to all adsorption behaviors. So new models were required for describing protein adsorption onto microspheres in different conditions.In our research, a novel isothermal model, including Langmuir and other adsorbing behaviors was presented basing on the holding degree of surface active sites and the interaction styles of protein immobilization. In Langmuir model, the adsorbing amount of protein was described as [PS] =Km[P]/1 + K[P], where [PS] was the concentration of adsorbed protein, [P] was the concentration of freeprotein at equilibrium state, and Km and K was constant. According to the interactions of protein and ligands, there were three patterns in the interactions of protein and ligands. On the similar assumption that the interaction of protein and microspheres were three styles, and based on the definition of the holding degree of surface active sites (Y), three adsorption behaviors could be described as Y K[ P ]φ/ K[P]φ+1 or ln K + φ ln[P] =ln(Y/1-Y) in which [P] was the concentration of free protein at equilibrium state, and φ and K was constant. Different scale of φ presented different adsorption behaviors, especially when φ was 1, the adsorption behavior was Langmuir adsorbing model. Figure I indicated the different adsorbing results in different adsorption behaviors (φ＞1, φ＜1,and φ=1).     

强流束在二极磁铁中的非线性传输—Lie代数分析

 用Lie代数方法分析了带电粒子束在二极磁铁中的非线性传输，包含了空间电荷效应。粒子在相空间中的分布采用K V分布。轨迹分析的结果做到二级近似，根据需要，还可以扩展到三级或更高级近似。在分析中，将磁铁沿中心轨道分成若干小段。在每个小段上利用所得公式进行轨迹计算，得到自洽的解。然后重复此过程，作下一小段的计算，直到最后一个小段为止。     

高气压反射式高能电子衍射仪监控脉冲激光外延氧化物薄膜

在超高真空分子束外延（MBE）生长技术中，反射式高能电子衍射仪（RHEED）能实时显示半导体和金属外延生长过程，给出薄膜表面结构和平整度的信息，成为MBE必备的原位表面分 析仪.为了研究氧化物薄膜如高温超导（YBa₂Cu₃O₇） 、铁电薄膜（Sr_1-xBa_x TiO₃）及它们的同质和异质外延结构的生长机理，获得高质量的符合各种应用 需要的氧化 物多层薄膜结构，在常规的制备氧化 关键词： 高温超导薄膜 RHEED     

Ag-Bi高温超导线材转变温度的测量

介绍了 Bi系银包套高温超导线材的电阻温度特性 ,用测电阻和电磁感应两种方法分别测量了材料的超导转变温度 ,电磁感应法测量曲线上台阶的出现表明材料中 Bi(2 2 2 3)和 Bi(2 2 12 )两相的存在。     

一种新的高温超导磁体电磁结构优化设计方法

本文阐述了用于高温超导磁体电磁结构优化设计的一种新方法,与一般优化方法不同之处在于其不用定义磁体的初始结构形状,采用该方法可以得到满足规格和性能要求的较佳磁体结构.通过此方法优化设计了一个中心磁场为3T的Bi系高温超导磁体,其设计结果与满足同样要求且经过优化的单螺管高温超导磁体的设计结果作了对比,由结果表明该方法具有很好的优化效果.     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

纳米晶复合Pr2Fe14B/α-Fe永磁材料磁性的研究

采用熔体快淬的方法制备Pr₂Fe₁₄B/α-Fe纳米晶复合永磁材料.使用振动样品磁强计(VSM)测量样品的室温磁性能.实验合金成分为(Pr_xFe_94.3-xB_5.7)_0.99Zr₁(其中x＝8.2，8.6，9.0，9.4，9.8，10.2，10.6，11.0，11.4(原子分数，%)).系统地研究了辊速及合金成分对快淬带磁性能的影响，当Pr原子分数由8. 关键词： 纳米复合永磁材料 熔体快淬 2Fe₁₄B/α-Fe')" href="#">Pr₂Fe₁₄B/α-Fe 磁性